• QC LABORATORY OF GESCSL has been Approved And Accredited For ISO/IEC 17025:2005-NABL Accreditation
• Samples Collection : approx. 200/day

• Online TOC analyzer works complete in online system which reports parameters results on display board which can be seen everywhere any time, its works 24*7 hrs. It continuously monitored by pollution boards (CPCB,GPCB)
• Parameters :- FLOW, pH, TOC, COD , TSS, BOD.
• Offline Total Organic Carbon (TOC) is a measure of the total amount of carbon in organic compounds.
• TOC = Total Carbon – Inorganic Carbon
• Another variant employs acidification of the sample to evolve carbon dioxide and measuring it as inorganic carbon (IC), then oxidizing and measuring the remaining non-purgeable organic carbon (NPOC).
• HPLC – High-performance liquid chromatography (HPLC) is a chromatographic technique
• The main purposes for using HPLC are for identifying, quantifying and purifying the individual components of the mixture

• TSS Assembly : Total suspended solids (TSS) is the dry-weight of suspended particles, that are not dissolved, in a sample of water that can be trapped by a filter that is analyzed using a filtration apparatus.
• pH meter with temperature sensor & TDS & EC Meter : A pH meter is an instrument used to measure acidity or alkalinity of a solution. It is also known as pH.
• TDS – Total Dissolved Solids
• EC – Electrical Conductivity
• Dissolved Solids and Salt content can be measured by this instrument.
• UV Visible Spectrometer : UV/Vis spectroscopy is routinely used in analytical chemistry for the quantitative determination of different analyses, such as transition metals ions, highly conjugated organic compounds, and biological macromolecules.
• Spectrophotometer is an instrument that measures the amount of light absorbed by a sample.

• Ammonical nitrogen (NH3-N) is a measure for the amount of ammonia, a toxic pollutant in waste water.
• K-jheldal Assembly is used for analyzing Ammonia followed by distillation and titration.COD REACTERS
• COD parameters determines the oxygen required for chemical oxidation of most organic matter and oxidizable inorganic substances with the help of strong chemical oxidant.
• COD test is widely used in the operation of treatment facilities in domestic and industrial wastewater.

• It is used to separate volumes of air, or prevent airborne contaminants from entering an area. Laminar flow hoods are used to exclude contaminants from sensitive processes in science, electronics and medicine.

• It is type of toxicity test carried out on fish. 90% Survival rate of fish after 96 hours in 100% effluent is the standard.
• We had separate Micro Department for deep study of Microbial activities in plant and other R & D studies to improve aeration system.

Daily monitoring of Culture slides and MPN of inlet – outlet samples.